S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

S-100 Ultra-high Speed Stand-alone Universal Device Programmer support many manufacturer,pcs devices and support low Voltages,extremely fast speed.

Descriptions of S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

S-100 Ultra-high Speed Stand-alone Universal Device Programmer
1.support more than 300 IC manufacturer, More than 80000 pcs devices.
2.Support devices with Vcc Voltages as low as 1.2v,extremely fast speed.

S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

Top 9 Reasons to Get S100 Ultra-high Speed Programmer:

1. Support More than 300 IC manufacturer, More than 80000 pcs devices.

2. Support devices with Vcc Voltages as low as 1.2V

3. Extremely fast speed. 64 Mb NOR FLASH memory in 12 seconds and 1Gb NAND in 110 seconds.

4. Built with 144 universal pin-drivers. Universal adaptors are available for varies packages up to 144 pins. New device support will be easier.

5. The programmer is controlled by a PC via USB2.0 (high speed) to program a chip.

6. ISP/ICP programming capability available via ISP/ICP adaptor.

7. Only IC manufacturer approved programming algorithms are used for high reliability. (+5%~-5%) and (10%~-10%) Vcc verification enhances programming reliability.

8. Over-current and over-voltage protection for safety of the chip and programmer hardware.

9. Windows XP/Vista/Win7 compatibility

Hardware & Electrical Specifications:

Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND)n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU. .

Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...

PC interface: USB2.0

Power:

Power source: 100~240 V AC 50~60 Hz

Power consumption: ~0.5 A

Dimension(W*D*H): 134mm*188mm*65mm

Operation temperature: 0 ~ 40 C (32 ~ 105 F)

Package List:

1pc x S100 Ultra-high Speed Stand-alone Universal Device Programmer

Tags: S-100 , S100 , beeprog replacement , S100 programmer ,

Wholesale Top quality Iprog+ Programmer BENZ ECOM DoIP Diagnostic and Programming Tool, DSP3 Odometer Correction Tool, VAS 5054A, GM Tech2, Scania VCI3, NEXIQ 2 USB Link, SBB VAG Pro, DP5 , SBB Key Programmer, wiTech MicroPod II, vocom 88890300, Renault CAN Clip. The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.

S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

Product Category

New Arrials

Home › Products › ECU Chip Tuning › S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog

Related Items of S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog